![]() ![]() Supplies a reliable PPM signal to test and adjust your servo motors.Displays the internal resistance of each individual cell in lithium-based battery packs.At discharge rate of 180mA, can discharge lithium-based battery packs to an adjustable threshold.Checks estimated capacities for Lithium-based packs and indicates if they require charging before use. ![]() Displays estimated voltages for NiCd/NiMH batteries for TX and RX (4-7 cells).Displays estimated voltages for LiPo/LiFePO4/Li-ion (2-7 cells) packs and individual cells.Do not leave your battery discharging with this device unattended. Operating voltage range: 120 160 V Maximum output current: 30 A Peak output current: 50 A (5s) Communications: CAN 2. Let the unit cool to room temperature before discharging again. Note: To avoid overheating, refrain from using the discharge function for more than six minutes at a time. But wait-that's not all! This cell meter can even be used to test movement and adjust your servos via PPM signal! ![]() In addition to allowing you to check the voltage of your batteries and view the capacity and internal resistance of each individual cell in lithium-based packs, this product functions as both a battery discharger and a battery balancer.Įvaluate the health of your battery pack and decide when to discard or replace it, discharge your pack to an adjustable threshold to improve its run time, and balance your batteries to optimize their performance and extend their lifespan.
0 Comments
Leave a Reply. |